Indesit HOTPOINT HVL241UK Hizmet Bilgileri - Sayfa 22

Yıkayıcı Indesit HOTPOINT HVL241UK için çevrimiçi göz atın veya pdf Hizmet Bilgileri indirin. Indesit HOTPOINT HVL241UK 23 sayfaları.

T. Power Module

Service Modules are not supplied with an Eeprom fitted. Order and fit the correct item

before fitting the module to the machine.

1. Remove the back panel (B).

2. Remove the T15 torx screw and the hardware key cover securing the module support to the

cabinet.

3. Disconnect the wiring connections, note the plug positions

4. Lift the module and support clear.

NOTE: - To remove or fit the Eeprom,

use the Eeprom Removal Tool (Part

No. C00066292).

On the original control board, the

Eeprom is soldered to the board and

cannot be removed. When replacing

the board an Eeprom will also be

required.

When fitted it MUST be inserted the

correct way round, with the notch on

the Eeprom at the same end as the

notch on the socket.

Three variations of Eeprom can be found

or used on Power Boards:

C00066292

EEPROM

Notch this end