Indesit BAN 40 FNF WD xx (TK) Kullanım Talimatları Kılavuzu - Sayfa 5

Buzdolabı Indesit BAN 40 FNF WD xx (TK) için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit BAN 40 FNF WD xx (TK) 16 sayfaları. Refrigerator/freezer combination
Ayrıca Indesit BAN 40 FNF WD xx (TK) için: Kullanım Talimatları Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of

the appliance and any furniture above it, and at least 5 cm

between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the

appliance and the wall behind it, fit the spacers supplied in

the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator

by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical

socket ensure the following:

• The appliance is earthed and the plug is compliant with the

law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on

the bottom left side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values

indicated on the data plate located on the bottom left side

(e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If

the socket is incompatible with the plug, ask an authorised

technician to replace it (see Assistance). Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should these

safety measures not be observed.

Accessories

•

SHELVES

: with or without grill.

Due to the special guides the shelves are removable and the

height is adjustable (see diagram), allowing easy storage of

large containers and food. Height can be adjusted without

complete removal of the shelf.

• Varies by number and/or position.

Available only on certain models.

FLEX COOL BOX

This is the new box to keep meat, fish and cheese fresh.

positioned in the "lower" part of the fridge compartment, it is

ideal for meat and fish; when moved to the "top" part of the

fridge, it is perfect for cheese.

when it is not needed.

ODOUR FILTER

: Some models are fitted with a new odour

filter with active carbons, which ensures better air quality inside

the refrigerator.

The filter is located on the bottom right-hand side, inside the

ventilation opening.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (see Installation).

! Before connecting the appliance, clean the compartments

and accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes

after being switched on. The compressor also starts each time

the power supply is cut off whether voluntarily or involuntarily

(blackout).

1. Set the FREEZER OPERATION knob on .

2. Insert the plug into the socket and ensure that the green

POWER indicator light illuminates.

3. Turn the FREEZER OPERATION knob to an average value

and press the SUPER FREEZE button (rapid freezing):

the SUPER FREEZE indicator light will illuminate. Once

the refrigerator has reached the optimal temperature, the

indicator light goes out and you can begin food storage.

4. Turn the REFRIGERATOR OPERATION knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system

maintains an optimal humidity level in the compartment,

preserving the original quality of the food, preventing the food

from sticking

When

It can be taken out of the fridge