Indesit PBA Series Kullanım Talimatları Kılavuzu - Sayfa 10

Buzdolabı Indesit PBA Series için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit PBA Series 48 sayfaları. Refrigerator/freezer combination
Ayrıca Indesit PBA Series için: Kullanım Talimatları Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Installation

! Before placing your new appliance into operation please read

these operating instructions carefully. They contain important

information for safe use, for installation and for care of the

appliance.

! Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate

correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between

the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation

kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to the

electricity mains. Before inserting the plug into the electrical socket

ensure the following:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left

side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised

technician to replace it ( see Assistance ). Do not use extension

cords or multiple sockets.

! Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).

! The manufacturer declines any liability should these

The manufacturer declines any liability should these

safety measures not be observed.

Accessories

•

: with or without grill.

SHELVES

Due to the special guides the shelves are removable and the

height is adjustable ( see diagram ), allowing easy storage of large

containers and food. Height can be adjusted without complete

removal of the shelf.

• Varies by number and/or position.

Available only on certain models.

bin: to store food (such as cold meats) for a long

MULTI-USE

time and also prevent odours from lingering in the refrigerator.

FLEX COOL BOX

This is the new box to keep meat, fish and cheese fresh. When

positioned in the "lower" part of the fridge compartment, it is ideal

for meat and fish; when moved to the "top" part of the fridge, it is

perfect for cheese. It can be taken out of the fridge when it is not

needed.

Indicator light: to identify the coldest area in the

TEMPERATURE

refrigerator.

1. Check that OK appears clearly on the indicator light ( see

diagram ).

2. If the word "OK" does not appear it means that the temperature

is too high: adjust the REFRIGERATOR OPERATION knob to a

higher (colder) position and wait approximately 10 hours until

the temperature has stabilised.

3. Check the indicator light again: if necessary, readjust it following

the initial process. If large quantities of food have been added or

if the refrigerator door has been opened frequently, it is normal

for the indicator not to show OK. Wait at least 10 hours before

adjusting the REFRIGERATOR OPERATION knob to a higher

setting.

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions ( see Installation ).

! Before connecting the appliance, clean the compartments and

accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal light

illuminates.

2. Turn the TEMPERATURE ADJUSTMENT knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment automatically

adjusts itself according to the position of the thermostat knob.

= warmest

= coldest

We recommend, however, a medium position.

The cooling section of the refrigerator is located inside the back wall

of the refrigerator compartment for increased space and improved

aesthetics. During operation, the back wall will be covered in frost

or water droplets depending on whether the compressor is

operating or paused. Do not worry, the refrigerator is functioning

normally.

Chiller system

The appliance comes with one of the chiller systems described

below: take note of your system in order to determine the most

efficient food storage method.