Indesit D2FHK26B Günlük Referans Kılavuzu - Sayfa 5

Bulaşık Makinesi Indesit D2FHK26B için çevrimiçi göz atın veya pdf Günlük Referans Kılavuzu indirin. Indesit D2FHK26B 17 sayfaları.

Sayfayı Yazdır

LOADING THE RACKS

UPPER RACK

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place bulky

crockery in the lower basket and low position to make the most of the

tip-up supports by creating more space upwards and avoid collision with

the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see figure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position. To restore to the lower position, press

the levers A at the sides of the rack and move the

basket downwards.

We strongly recommend that you do not ad-

just the height of the rack when it is loaded.

NEVER raise or lower the basket on one side

only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be

fold or unfold to optimize the

arrangement of crockery inside

the rack. Wine glasses can be

placed safely in the foldable flaps

by inserting the stem of each glass

into the corresponding slots.

Depending on the model:

• to unfold the flaps there is

needed to slide it up and rotate

or release it from the snaps and

pull it down.

• to fold the flaps there is needed to rotate it and slide flaps down or

pull it up and attach flaps to the snaps.

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

LOWER RACK

(loading example for the lower rack)

CUTLERY BASKET

It is fitted with top grids for improved

cutlery arrangement.

It must only be positioned at the front

of the lower rack.

Knives and other utensils with sharp

edges must be placed in the cutlery

basket with the points facing down-

wards or they must be positioned

horizontally in the tip-up compart-

ments on the upper rack.

For pots, lids, plates, salad bowls,

cutlery etc.. Large plates and lids

should ideally be placed at the

sides to avoid interferences with

the spray arm.