Indesit DIFP 28T9 Kullanım Talimatları Kılavuzu - Sayfa 13
Bulaşık Makinesi Indesit DIFP 28T9 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit DIFP 28T9 16 sayfaları.
Sayfayı Yazdır- 1. Table of Contents
- 2. Precautions and Advice
- 3. Product Data
- 4. Installation
- 5. Electrical Connection
- 6. Description of the Appliance
- 7. Refined Salt and Rinse Aid
- 8. Loading the Racks
- 9. Detergent and Dishwasher Use
- 10. Wash Cycles
- 11. Special Wash Cycles and Options
- 12. Care and Maintenance
- 13. Troubleshooting
- 14. Product Guarantee and Repair Information
Special wash cycles
and Options
Notes:
Optimum performance levels when using the "Rapid 40'" cycle
can be achieved by respecting the specified number of place
settings.
To reduce consumption, only run the dishwasher when
it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
Wash cycle EXTRA
EXTRA makes it possible to carry out a heavy-duty wash cycle
of large crockery up to a max height of 53cm: baking pans,
oven grids, dripping pans, hob grids, large saucepans, serving
dishes, pizza dishes, stainless-steel hood filters.
Remove the upper rack to load bulky crockery.
In order for the water to reach the crockery everywhere, arrange
it as shown in the Figure.
The cycle can also be used on large delicate crockery using
the option Extra Light (see Wash Options).
Do not start the dishwasher without the upper rack using
wash cycles other than EXTRA.
To carry out the wash cycle Extra and Extra with the
*
Light
option pour the detergent directly into the tub and
not into the dispenser.
Release the two locks (right and
left) and pull out the rack.
When the upper rack is fitted,
the locks must be always
closed.
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start
The start of the wash cycle may be delayed for a
period of time between 1 and 12 hours.
1. Press the DELAYED START button: the corresponding
symbol appears on the display; each time you press the
button, the time (1h, 2h, etc. up to max. 12h) from the start
of the selected wash cycle will be increased.
2. Select the cycle and close the door: the timer will begin
counting down;
3. Once this time has elapsed, the indicator light switches
off and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
press the DELAYED START button. To cancel it, press the
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.
The Delayed Start function cannot be set once a wash cycle
has been started.
*
Only available in selected models.
GB
13