Indesit BIMS 53 K.A B IX GB S Kullanım Talimatları Kılavuzu - Sayfa 4
Fırın Indesit BIMS 53 K.A B IX GB S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit BIMS 53 K.A B IX GB S 16 sayfaları.
Ayrıca Indesit BIMS 53 K.A B IX GB S için: Kullanım Talimatları Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Connecting the power supply cable to the mains.
GB
Fit a normalized plug to the cable, which corresponds
to the load indicated on the data plate; if the cooker is
connected directly to the mains, an omnipolar circuit-
breaker with a minimum opening of 3 mm between the
contacts, suitable for the load indicated and complying
with current directives, must be installed between the
appliance and the mains (the earthing wire must not be
interrupted by the circuit-breaker). The power supply
cable must be positioned so that it does not exceed
room temperature by 50°C at any point of its length.
Before making the connection check that:
• the circuit breakers or fuses of the home system can
support appliance load (see data plate);
• the power supply system has an efficient earthing
connection which complies with the provisions of
current regulations and the law;
• there is easy access to the socket or the omnipolar
circuit-breaker once the cooker has been installed.
! do not use reducers, adapters or shunts as these
could cause heating or burning.
Connection n° 2
Disposing of the plug.
! THIS APPLIANCE MUST BE EARTHED.
Ensure that before disposing of the plug itself,
you make the pins unusable so that it cannot be
accidentally inserted into a socket. Instructions for
connecting cable to an alternative plug:
! the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow -Earth
Blue
Brown
If the colours of the wires in the mains lead do not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows.
Connect Green & Yellow wire to terminal marked "E" or
6 or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked "L" or coloured
Red. Connect Blue wire to terminal marked "N" or
coloured Black. If a 13 amp plug (BS 1363) is used it
must be fitted with a 13 amp fuse.
A 15 amp plug must be protected by a 15 amp fuse,
either in the plug or adaptor or at the distribution
board.If you are in any doubt about the electrical
supply to your machine, consult a qualified electrician
before use.
How to connect an alternative plug
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
4
-Neutral
-Live
The wires in this mains lead are coloured in
accordance with the
following code:
BLUE
"NEUTRAL" (N)
BROWN "LIVE" (L)
GREEN AND YELLOW
"EARTH" (E)
Disposing of the
appliance
When disposing of
the appliance please
remove the plug by cutting the mains cable as close
as possible to the plug body and dispose of it as
described above.
! The plug and socket must be easily accessible.
! VERY HOT SURFACES
! VERY HOT SURFACES
! VERY HOT SURFACES
FOOD OR GREASE ON THESE
SURFACES COULD CAUSE
SMOKE AND POSSIBLY EVEN BURN
YOU MUST KEEP THE OVEN
AND GRILL CAVITIES CLEAN
GREEN &
YELLOW
13 amp fuse
BROWN
CROSS-BAR
BLUE
CORD GRIP
! ATTENTION
! ATTENTION
! ATTENTION
WHEN USING THE MAIN OVEN
YOU MUST ENSURE THAT THE
BASE OF THE CAVITY IS NOT
COVERED WITH ALUMINUM
FOIL, UTENSIL OR ANY OTHER
FORM OF COVERING. FAILURE
TO DO THIS MAY RESULT IN
THE CAVITY BEING DAMAGED.