Indesit FIMS73 KC.A J IX Kullanım Talimatları Kılavuzu - Sayfa 4
Fırın Indesit FIMS73 KC.A J IX için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit FIMS73 KC.A J IX 16 sayfaları.
Sayfayı Yazdır
Electrical connection
GB
! Ovens with a three-pole power supply cable are
designed to operate with alternated current at the
supply frequency and voltage indicated on the data
plate (at the bottom of the oven dashboard). The
earthing conductor of the cable is the yellow-green
conductor.
Two types of connection are provided:
Connection n° 1
Connecting the power supply cable to the mains.
Fit a normalized plug to the cable, which corresponds
to the load indicated on the data plate; if the cooker is
connected directly to the mains, an omnipolar circuit-
breaker with a minimum opening of 3 mm between the
contacts, suitable for the load indicated and complying
with current directives, must be installed between the
appliance and the mains (the earthing wire must not be
interrupted by the circuit-breaker). The power supply
cable must be positioned so that it does not exceed
room temperature by 50°C at any point of its length.
Before making the connection check that:
• the circuit breakers or fuses of the home system can
support appliance load (see data plate);
• the power supply system has an efficient earthing
connection which complies with the provisions of
current regulations and the law;
• there is easy access to the socket or the omnipolar
circuit-breaker once the cooker has been installed.
! do not use reducers, adapters or shunts as these
could cause heating or burning.
Connection n° 2
Disposing of the plug.
! THIS APPLIANCE MUST BE EARTHED.
Ensure that before disposing of the plug itself,
you make the pins unusable so that it cannot be
accidentally inserted into a socket. Instructions for
connecting cable to an alternative plug:
! the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow -Earth
Blue
Brown
If the colours of the wires in the mains lead do not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows.
Connect Green & Yellow wire to terminal marked "E" or
6 or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked "L" or coloured
Red. Connect Blue wire to terminal marked "N" or
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
4
-Neutral
-Live
coloured Black. If a 13 amp plug (BS 1363) is used it
must be fitted with a 13 amp fuse.
A 15 amp plug must be protected by a 15 amp fuse,
either in the plug or adaptor or at the distribution
board.If you are in any doubt about the electrical
supply to your machine, consult a qualified electrician
before use.
How to connect an alternative plug
The wires in this mains lead are coloured in
accordance with the
following code:
BLUE
"NEUTRAL" (N)
BROWN "LIVE" (L)
GREEN AND YELLOW
"EARTH" (E)
Disposing of the
appliance
When disposing of the
appliance please remove the plug by cutting the
mains cable as close as possible to the plug body and
dispose of it as described above.
! The plug and socket must be easily accessible.
GREEN &
YELLOW
13 amp fuse
BROWN
CROSS-BAR
BLUE
CORD GRIP