Indesit FM 70 P.1 MR Kurulum ve Kullanım Kılavuzu için Talimatlar - Sayfa 6

Fırın Indesit FM 70 P.1 MR için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu için Talimatlar indirin. Indesit FM 70 P.1 MR 13 sayfaları. Indesit built-in oven instruction manual

Sayfayı Yazdır

1. Front View

SAFETY MEASURES

During pyrolysis, the temperature inside the oven reaches

450° to 500°. These high temperatures are needed for

breaking down the residues inside the oven (see above).

Your oven is therefore equipped with the following safety

devices:

• The door automatically locks as soon as the tempera-

ture reaches a certain level in order to prevent any risk of

injury by burning.

• The power for the heating elements cuts off in case

an anomaly occurs.

Comments

1. Despite the high interior temperature throughout the

pyrolysis operation, the exterior walls of the oven remain

only slightly warm, due to:

• Reinforced insulation of the cooking chamber,

• A fan which circulates air to cool the walls.

2. Looking through the oven window, you might see parti-

cles that flare up during their destruction by pyrolysis upon

contact with a heating element. This is merely a phe-

nomenon of combustion. It is perfectly normal and

poses no risk.

PRECAUTIONS TO TAKE BEFORE PYROLYSIS

1. Be sure to eliminate any large spills with a damp

sponge. We strongly advise against the use of deter-

gents or any other oven cleaning products.

2. Remove all accessories. They are not designed to

resist the high temperatures of pyrolysis. Furthermore,

some of them might obstruct the circulation of heat on the

oven walls, thus harming the performance of the opera-

tion. The accessories can easily be cleaned like regular

dishes, even in a dishwasher.

3. Do not leave dish towels on the oven handle.

Important:

During pyrolysis, the surfaces may become hot. Keep

young children away.

Cleaning by Pyrolysis

How to start pyrolysis:

nate large spills, in order to avoid any risk of producing

fumes or flames.

• Immediate start: same procedure as for a cooking

operation,

• Delayed start: same procedure as for a cooking

Pyrolysis usually takes about 75 minutes. It can last as

long as 75 to 100 minutes depending on how dirty the

oven is.

What happens during pyrolysis?

The

either immediately, or at the preset time if you have pro-

grammed a delayed start.

The

It comes on when the temperature inside the oven

reaches a certain level. It is then impossible to open

the door.

What happens at the end of pyrolysis?

The

inside the oven has dropped sufficiently. It is then

possible to open the door, with the Function Selector still

Some white dust may remain on the bottom and walls of

the oven. Remove it with a damp sponge after the oven

has cooled completely.

If you wish to use the residual heat to start a cooking

operation, do not worry about the dust-it is harmless.

Remove all accessories from the oven. Elimi-

Close the door.

Set the Function Selector to

Set the programme. You can choose between:

operation.

indicator light comes on when pyrolysis starts :

indicator light is off when pyrolysis starts.

indicator light goes off and stays off.

indicator light goes off when the temperature