Indesit I6G52 Kullanım Talimatları Kılavuzu - Sayfa 8

Fırın Indesit I6G52 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit I6G52 16 sayfaları. Cooker and oven

Sayfayı Yazdır

Indesit I6G52 Kullanım Talimatları Kılavuzu

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a full ring showing the strength of the

flame for the relevant burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an anticlockwise direction

so that it is pointing to the maximum flame setting E.

3. Adjust the intensity of the flame to the desired level by turning the

BURNER knob in an anticlockwise direction. This may be the

minimum setting C, the maximum setting E or any position in between

the two.

If the appliance is fitted with an electronic lighting device*

(see figure), press the ignition button, marked with the

symbol

, then hold the BURNER knob down and turn it

in an anticlockwise direction, towards the maximum flame

setting, until the burner is lit.The burner may be

extinguished when the knob is released. If this occurs,

repeat the operation, holding the knob down for a longer

period of time.

! If the flame is accidentally extinguished, switch off the burner and

wait for at least 1 minute before attempting to relight it.

If the appliance is equipped with a flame failure safety

device*, press and hold the BURNER knob for

approximately 3-7 seconds to keep the flame alight and to

activate the device.

HOB GAS BURNER

SAFETY DEVICE

To switch the burner off, turn the knob until it reaches the stop position

•.

Flame adjustment according to levels

the burner flame intensity can be adjusted with the

knob according to 6 power levels, from maximum

to minimum with 4 intermediate positions:

a click will indicate the change from one level to

another when turning the knob. The system

guarantees a more precise adjustment, allows

to replicate the flame intensity and to identify

easily the preferred level for different cooking

operations.

ELECTRONIC

LIGHTING DEVICE

Practical advice on using the burners

For the burners to work in the most efficient way possible and to save

on the amount of gas consumed, it is recommended that only pans

that have a lid and a flat base are used. They should also be suited to

the size of the burner:

Burner

ř Cookware diameter (cm)

Fast (R)

Semi Fast (S)

Auxiliary (A)

To identify the type of burner, please refer to the diagrams contained in

the "Burner and nozzle specifications".

Using the oven

! The first time you use your appliance, heat the empty oven with its

door closed at its maximum temperature for at least half an hour.

Ensure that the room is well ventilated before switching the oven off

and opening the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances used during the

manufacturing process burning away.

! Before operating the product, remove all plastic film from the sides of

the appliance.

! Never put objects directly on the bottom of the oven; this will avoid

the enamel coating being damaged.

1. Select the desired cooking mode by turning the SELECTOR knob.

2. Select the recommended temperature for the cooking mode or the

desired temperature by turning the THERMOSTAT knob.

A list detailing cooking modes and suggested cooking temperatures

can be found in the relevant table (see Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the SELECTOR knob.

• Change the temperature by turning the THERMOSTAT knob.

• Stop cooking by turning the SELECTOR knob to the "0" position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat. It switches off

when the inside of the oven reaches the selected temperature. At this

point the light illuminates and switches off alternately, indicating that

the thermostat is working and is maintaining the temperature at a

constant level.

Oven light

This is switched on by turning the SELECTOR knob to any position

other than "0". It remains lit as long as the oven is operating. By

selecting

with the knob, the light is switched on without any of the

heating elements being activated.

24 - 26

16 - 20

10 - 14