Indesit KN6G66SA /U Kullanım Talimatları Kılavuzu - Sayfa 9
Fırın Indesit KN6G66SA /U için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit KN6G66SA /U 28 sayfaları. Cooker and oven
place the dripping pan in position 1 to collect
cooking residues (fat and/or grease).
MULTI-COOKING
• Use position 2 and 4, placing the food that
requires more heat on 2.
• Place the dripping pan on the bottom and the rack
on top.
BARBECUE
• Insert the rack in position 3 or 4. Place the food in
the centre of the rack.
• We recommend that you set the maximum power
level. The top heating element is regulated by a
thermostat and may not always be on.
PIZZA MODE
• Use a light aluminium pizza pan. Place it on the
rack provided.
For a crispy crust, do not use the dripping pan
(prevents crust from forming by extending cooking
time).
• If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
Planning cooking with the electronic
programmer*
Setting the clock
After the appliance has been connected to the power
supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button
COOKING END TIME
2. Within 4 seconds of having pressed these
buttons, set the exact time by pressing the + and -
buttons. The + button advances the hours and the -
button decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.
Setting the timer
The timer enables a countdown to be set, when the
time has elapsed a buzzer sounds.
To set the timer proceed as follows:
and the
simultaneously.
1. press the TIMER button
N.
2. Press the + and - buttons to set the desired time.
3. When the buttons are released the timer begins
counting down and the current time appears on the
display.
R
4. After the time has elapsed a buzzer will sound,
and this can be switched off by pressing any button
(except the + and - buttons). The symbol
switch off.
! ! ! ! ! The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings,
use the - button to adjust the volume of the alarm
buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use
and set a suitable temperature using the SELECTOR
and THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
2. Within 4 seconds of having pressed this button,
set the desired amount of time by pressing the + and
- buttons. If, for example, you wish to set a cooking
time of 30 minutes, the display will show:
N
3. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
m m m m m
display with the symbol
Next the desired cooking end time must be set:
4. Press the END COOKING TIME button
5. Within 4 seconds of having pressed this button,
adjust the cooking end time by pressing the + and -
buttons. If, for example, you want cooking to end at
13.00, the display shows:
O
6. 4 seconds after the buttons are released, the
current time (for example 10.00) reappears on the
display with the letter A (AUTO).
P
At this point, the oven is programmed to switch on
automatically at 12:30 and switch off after 30
minutes, at 13.00.
Setting the cooking time with an immediate start
*
Only available in certain models.
. The display shows:
will
.
and the letter A (AUTO).
.
9
GB