Indesit K3G51S/HU Kurulum ve Kullanım Kılavuzu için Talimatlar - Sayfa 6

Ocaklar Indesit K3G51S/HU için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu için Talimatlar indirin. Indesit K3G51S/HU 28 sayfaları. Cooker with electric oven

Sayfayı Yazdır
small but steady.
N.B.: in the case of liquid gas, the regulation screw
must be screwed in to the bottom.
•
check that the flame does not turn off when you turn
the tap quickly from high to low.
d Regulating the primary air of the burners:
The primary air of the burners requires no regulation.
Table1 (For Hungary)
Burner
Diameter
(mm)
Fast (R)
100
Semi Fast (S)
75
Auxiliary (A)
51
Nominal (mbar)
Supply pressures
Minimum (mbar)
Maximum (mbar)
* At 15°C and 1013 mbar-dry gas
P.C.S. G20
37,78 MJ/m
3
3
P.C.S. G25.1
39,11 MJ/m
P.C.S. G30
49,47 MJ/kg
S S
A
R
K3G51S/HU
Burner and nozzle characteristics
Nozzle
By-pass
Thermal
1/100 (mm)
power kW
1/100
Reduced
(mm)
41
0.80
128
30
0.50
104
30
0,50
76
Important
On completion of the operation, replace the old rating
sticker with one indicating the new type of gas used. This
sticker is available from our Service Centres.
Note
Should the pressure of the gas used be different (or vary)
from the recommended pressure, it is necessary to fit a
suitable pressure regulator onto the inlet pipe in
compliance with current National Regulations relative to
"regulators for channelled gas".
G 20
Thermal
Flow*
Nozzle
power kW
l/h
1/100
Nominal
(mm)
3,30
314
128
2,10
200
104
1,15
109
76
25
20
30
6
G 25.1
Thermal
Flow*
Nozzle
power kW
l/h
1/100
(mm)
2,85
262
87
1,95
179
70
1,05
97
52
25
20
30
G 30
Thermal
Flow*
power kW
g/h
Nominal
3,00
218
1,90
138
1,00
73
30
20
35