Indesit PWDE 8147 S Kullanım Kılavuzu - Sayfa 4

Yıkayıcı/Kurutucu Indesit PWDE 8147 S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Indesit PWDE 8147 S 16 sayfaları.

Sayfayı Yazdır

As the colours of the wires in the lead may

not correspond with the coloured markings

identifying the terminals in your plug, proceed

as follows:

Connect Green & Yellow wire to terminal

marked E or

Yellow.

Connect Brown wire to terminal marked L or

coloured Red.

Connect Blue wire to terminal marked N or

coloured Black.

If a 13 amp plug (BS 1363) is used it must be

fitted with a 13 amp fuse, either in the plug or

adaptor or at the distribution board.

If you are in any doubt regarding the electrical

supply to your machine, consult a qualified

electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in

accordance with the following code:

BLUE

BROWN

GREEN & YELLOW

GREEN &

YELLOW

BROWN

BLUE

Disposing of the appliance:

When disposing of the appliance please

remove the plug by cutting the mains cable

as close as possible to the plug body and

dispose of it as described above.

! The washer-dryer should not be installed

in an outdoor environment, not even where

the area is sheltered, because it may be very

dangerous to leave it exposed to damp, rain

and thunderstorms.

! When the washer-dryer is installed, the mains

socket must be within easy reach.

! Do not use extensions or multiple sockets.

! The power supply cable must never be bent

or dangerously compressed.

or coloured Green or Green &

NEUTRAL (N)

LIVE (L)

EARTH (E)

13 ampere fuse

CROSS-BAR

CORD GRIP

! The power supply cable must only be

replaced by an authorised serviceman.

Warning! The company denies all liability if and

when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and

before you use it for the first time, run a wash

cycle with detergent and no laundry, using the

wash cycle 1.