AEG A81000TNW0 Kullanıcı Kılavuzu - Sayfa 16

Dondurucu AEG A81000TNW0 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG A81000TNW0 20 sayfaları. Built in freezer
Ayrıca AEG A81000TNW0 için: Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (36 sayfalar)

Sayfayı Yazdır

Installation

Unscrew the top door hinge pin of the

appliance then screw it back on the oth-

er side.

Fit the appliance door on the upper door

hinge pin.

Remove the lower hinge. Put over the

pin in the direction of the arrow.

Unscrew and install the screw on the

opposite side.

10. Install the lower hinge on the opposite

side leaving the position of the door un-

changed.

11. Screw in the one screw in the place set free on the other side as well as the adjustable

feet (2 pieces).

12. Remove and install the handle

opposite side.

13. Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket.

In case you do not want to carry out the above mentioned operations, contact the nearest

After Sales Service Force. The After Sales Service specialist will carry out the reversibility of

the doors at your cost.

Electrical Connection

CAUTION!

Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

WARNING!

This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

5) If foreseen

on the