AEG A92860GNX1 Kullanıcı Kılavuzu - Sayfa 17

Dondurucu AEG A92860GNX1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG A92860GNX1 24 sayfaları. Aeg freezer

Sayfayı Yazdır

7.4 Removing the transport support

7.5 Rear spacers

7.6 Connecting the water

hose.

Water supply should be provided with a

tap and 3/4" male connector within 1,5

m from the appliance.

This work is to be carried out by a skilled

plumber.

There are different type-approved taps

and tap assemblies on the market.

The water hose must not be cracked,

squeezed or put in tight bends.

The safety valve provided in a package

inside the appliance should be used to

prevent overflow.

Your appliance is equipped with trans-

port support to secure the door during

transportation.

To remove them do these steps:

• Open the door.

• Remove the transport support from

the door sides.

• Remove the transport support from

the lower hinge (some models).

Some models are fitted with a si-

lencing pad under the cabinet.

Do not remove this pad.

• Install the spacers provided within the

accessory bag as shown in the figure.

• Install the spacers on the brackets of

the condenser (black grill) at the back

of the appliance.

Before the safety valve is placed on the

tap, turn the pointer counter clockwise

to number 10 with the enclosed plastic

key.

Install the safety valve on the tap and let

at least 10 litres of water flow through

the device.

Before connecting the appliance turn

the pointer to number 1 on the safety

valve.

If the safety valve has shut off, detach it

and press the red plunger which is loca-

ted inside the lower housing of the de-

vice itself.

Before the appliance is placed in final lo-

cation, ensure that the water connection

ENGLISH