AEG ABE688E1LS Kullanıcı Kılavuzu - Sayfa 16

Dondurucu AEG ABE688E1LS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG ABE688E1LS 20 sayfaları.

www.aeg.com

Problem

Power indicator light flashes. An error has occurred in

If the advice does not lead

to the desired result, call the

nearest Authorized Service

Centre.

8.2 Closing the door

1. Clean the door gaskets.

Possible cause

The food products' tempera-

ture is too high.

Many food products are

stored at the same time.

The thickness of the frost is

greater than 4-5 mm.

The door has been opened

often.

The Frostmatic function is

switched on.

There is no cold air circula-

tion in the appliance.

measuring the temperature.

2. If necessary, adjust the door. Refer to

installation instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

Solution

Let the food products tem-

perature decrease to room

temperature before storage.

Store less food products at

the same time.

Defrost the appliance.

Open the door only if neces-

sary.

Refer to "Frostmatic func-

tion" section.

Make sure that there is cold

air circulation in the appli-

ance. Refer to "Hints and

Tips" chapter.

Contact a qualified electri-

cian or the nearest Author-

ized Service Centre.