AC Tool Supply 3M Full Body Harnesses Kullanıcı Talimatları - Sayfa 4

Koruma Cihazı AC Tool Supply 3M Full Body Harnesses için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. AC Tool Supply 3M Full Body Harnesses 17 sayfaları. 3m occupational health and environmental safety fall protection equipment

Sayfayı Yazdır

during the clearance calculation process.

2. Wear proper Personal Protective Equipment when performing Inspection, Cleaning and

Maintenance procedures. Safety glasses & gloves are recommended.

FALL ARREST SYSTEM COMPONENTS

System Components

A complete fall arrest system consists of the following components: Anchorage, Body Support,

and Connecting Devices. Note: For continuous protection, more than one system may be

needed.

Anchorage

An anchorage, as deﬁ ned by OSHA 29 CFR 1926.502 "shall be independent of any anchorage

being used to support or suspend platforms and capable of supporting at least 5,000 pounds

(22.2 kN) per employee attached, or shall be designed, installed, and used as follows: as part of a

complete personal fall arrest system which maintains a safety factor of at least two; and under the

supervision of a qualiﬁ ed person."

Body Support

A body support is the component of a personal fall arrest system that is worn on or around the

body. Per OSHA 29 CFR 1926.502 effective January 1, 1998, body belts are not acceptable as

part of a personal fall arrest system. Note: The use of a body belt in a positioning device system

is acceptable. Full body harnesses must be used for all fall arrest systems.

Connecting Devices

A connecting device is the link between the body support and anchorage. Connecting devices

will vary depending on the application.

USE INSTRUCTIONS AND LIMITATIONS

Important

Before use, the user must read and understand these User Instructions. Keep these User

Instructions for reference.

Purpose

The 3M Full Body Harness is designed to be used as part of a personal fall arrest, controlled

descent, restraint, rescue, ladder climbing, or work positioning system.

Use Instructions

1. The complete fall protection system must be planned (including all components, calculating

fall clearance, and swing fall) before using.

2. Users must have a rescue plan, and the means at hand to implement it, that provides for the

prompt rescue of employees in the event of a fall, or assures that employees are able to rescue

themselves.

Use Limitations

1. Universal size Full Body Harnesses and individually sized Full Body Harnesses smaller

than XXL are designed for users with a maximum capacity up to 310 lb (141 kg) including

clothing, tools, etc.

2. Full Body Harnesses sized XXL and larger are designed for users with a maximum capacity

actoolsupply.com