AEG ARCTIS Kullanım Talimatları Kılavuzu - Sayfa 8

Installation

Your freezer needs air

For correct operation this appliance must be located in a dry atmos-

phere, away from heat sources, e.g. cookers, radiators, boilers and

direct sunlight.

You should also ensure that air can circulate freely around the back

and the top of the cabinet. There should be 100mm (4") between the

top of the cabinet and any overhanging kitchen furniture.

Alternatively allow 50mm (2") between the top of the cabinet and any

overhanging kitchen furniture and a gap of 25mm (1") on either side

of the appliance.

If your appliance is installed under a

continuous worktop, an air outlet

opening of at least 200 cm

ventilation grille (A/B) matching the

worktop design should be installed at

the rear of the worktop.

The cut surfaces of the worktop (C)

should be varnished to avoid swelling

due to penetration of moisture.

The appliance wall distance must be

at least 30 mm and should be

checked before the ventilation grille is inserted.

Special accessories:

A Ventilation grille, brown

B Ventilation grille, white

and a

AEG36

A/B

105

570

550

200 cm

93-103