A-Neuvideo ANI-QUAD-LITE-4K Kullanım Kılavuzu - Sayfa 5
Anahtar A-Neuvideo ANI-QUAD-LITE-4K için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo ANI-QUAD-LITE-4K 12 sayfaları. 4x1 hdmi quad multi-viewer w/ seamless switcher
Ayrıca A-Neuvideo ANI-QUAD-LITE-4K için: Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
A
NEUVIDEO
FRONT PANEL
POWER LED:
The LED will illuminate green when the unit is working, red when the unit is in standby mode.
q
IR:
IR receiver window. It accepts the remote control signal of this device only.
w
CH1/CH2/CH3/CH4 BUTTON:
e
MODE BUTTON:
Press this button to cycle thru output selection display mode (Please see "Display Modes" detail description). Press
r
this button 5 times until the output screen is full screen and equal proportion display.
RESO:
Cycle to select different output resolutions. Press this button 5 times to open or close the window display frame.
t
SERVICE PORT:
Firmware update only. (Does not control device.)
y
BACK PANEL
HDMI INPUT:
Connect to HDMI source device such as DVD player or PS4.
q
HDMI OUTPUT:
Connect to HDMI display device such as TV or Projector with a HDMI cable.
w
VGA OUTPUT:
VGA output port, this port output signal is the same as the HDMI output port.
e
AUDIO OUTPUT:
Analog audio output port. (Note: If the HDMI output is MODE 1, the audio output follows the video content. If the
r
HDMI output is MODE 2/3/4/5, press CH1/CH2/CH3/CH4 up to 5 times to select the audio output or use the remote control to cycle to the
audio output. The default status is CH1 screen audio output.)
DC 12V:
Plug the 12V/1A DC power supply into the unit and connected the adapter to an AC outlet.
t
Selects input channel (Please see "Display Modes" detail description).
OPERATION & FUNCTIONS
3