AEG ARCTIS Kullanım Talimatları Kılavuzu - Sayfa 16

Description of the appliance

Control Panel

1 ON/OFF button and stand-by display (green)

2 Temperature display

4 FROSTMATIC button and FROSTMATIC indicator light (yellow)

5 ALARM OFF button and warning indicator light (red)

(see section: "Control and Information Systems")

Temperature setting buttons

These buttons are connected to the temperature display.

• The temperature display is switched over from the display of the

ACTUAL temperature (Temperature display is illuminated) to the dis-

play of the DESIRED temperature (Temperature display flashes) by

pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).

• Each time one of the two buttons is pressed again the DESIRED tem-

perature is adjusted by 1 °C.

• If neither button is pressed, the temperature display automatically

switches back after a short period (approx. 5 sec.) to the display of

the ACTUAL temperature. The ACTUAL temperature in the appliance is

now adjusted to match the preset DESIRED temperature.

DESIRED temperature means:

The temperature that is required in the appliance, this can be adjusted

to the temperatures shown in the display. The DESIRED temperature is

indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently

present in the appliance. The ACTUAL temperature is indicated with

illuminated numbers.

Once the FROSTMATIC function has been switched on the DESIRED

temperature that was set originally cannot be changed.

114

The temperature is adjusted using the

„+" (WARMER) and „-" (COLDER) buttons.

818 36 10-01/6