A-Neuvideo HD-44G Kullanım Kılavuzu - Sayfa 13
Anahtar A-Neuvideo HD-44G için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo HD-44G 20 sayfaları. Ethernet (tcp) set up
Ayrıca A-Neuvideo HD-44G için: Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (6 sayfalar)
Sayfayı Yazdır
A
NEUVIDEO
1. ANI-100 IR 300M Receiver
ANI-100
IR Receiver Set
2. ANI-100C IR 2M Receiver
IR Receiver cable 6ft (2M)
ANI-100C
IR Receiver Cable
*** When you plug the External IR extender into the switcher, the front panel IR receiver remains active. ***
Pin configuration for IR 984 feet (300M) Extender Receiver such as ANI-100 compatible
ANI-100
IR Receiver Set
ANI-100 Receiver and ANI-101 Transmitter The DISTANCE maximum ~ 984 feet (300M)
Pin configuration for IR Receiver 6 feet (2M) cable such as ANI-100C compatible
IR Receiver cable 6ft (2M)
ANI-100C
IR Receiver Cable
ANI-100 Receiver and ANI-101C Transmitter The DISTANCE maximum ~ 984 feet (300M)
Note: The External IR jack has voltage on the "Ring" portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug).
Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
Switcher IR EXT. In
R S -232
IR E XT. in
RS - 232
ANI-100 Maximum Distance ~ 984 feet (300M)
The ANI-100 IR Receiver is required when using the port "ALL in" Jack.
Switcher IR EXT. In
R S -232
IR E XT. in
RS - 232
ANI-100C Maximum Distance ~ 6 feet (2M)
The ANI-100C IR Receiver will not function on the port "ALL in" Jack.
Tip: Signal
Ring
Tip
Ring :VCC
Sleeve: GND
Sleeve
Tip: Signal
Tip
Ring: NC
Sleeve: GND
Sleeve
Distance: Max.300M
R oHS /95/E C
INP UT
DC 12V
IR EXT .
Distance: Max.(2M)
R oHS /95/E C
INP UT
DC 12V
IR EXT .
Sleeve
Ring
Tip (center)
Sleeve
Ring
Ring
Tip (center)
11
IR EXTENDER
Cable (3C)
IR Receiver (ANI-100)
IR PN#: ANI-XXXX
IR Rx
ANI-100
Control Switch ANI-XXXX
Cable (2C)
IR Receiver (ANI-100C)
IR PN#: ANI-XXXX
IR Rx
ANI-100
Control Switch ANI-XXXX
VCC (Ring)
GND (Sleeve)
Signal (center)
GND (Sleeve)
Signal (center)