A-Neuvideo HD-44G Kullanım Kılavuzu - Sayfa 3
Anahtar A-Neuvideo HD-44G için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo HD-44G 20 sayfaları. Ethernet (tcp) set up
Ayrıca A-Neuvideo HD-44G için: Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (6 sayfalar)
Sayfayı Yazdır
CONTENTS
INTRODUCTION & PACKAGE CONTENTS ....................1
FEATURES & SPECIFICATIONS ......................................2
FRONT PANEL .................................................................3
REAR PANEL ....................................................................6
TYPICAL APPLICATION ..................................................7
REMOTE CONTROL ........................................................9
IR EXTENDER ................................................................. 11
EDID FUNCTION ............................................................13
RS-232 SERIAL INTERFACE ...........................................16
INTRODUCTION
The HD-44G is professional 4x4 matrix routing switch. Supporting
four (4) HDMI Inputs. Output supported (4) HDMI. The HD-44G is
based on the HDMI standard and supports full resolution HDMI
Video with embedded EDID. With a signal bandwidth of 340Mhz,
there is no signal degradation. High Defi nition Digital signals can
be selected and distributed from any (4) Inputs to any (4) Outputs
in any combination. The Switcher is certifi ed as being fully CEC
and HDCP 2.0 compliant, full HD HDMI V1.4a 3D formats, data
rates up to 6.75 Gbps. Supports UXGA/WUXGA/DVI 1920x1200
resolution to any HD displays. The Switcher is certifi ed as being
fully HDMI and HDCP compliant, with RoHS, CE, FCC certifi cation.
Support high resolution HDMI sources routed to HDMI displays,
monitors, projector or audio receivers. The EDID management can
be selected between seven (7) different modes. Control is provided
via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a
web-browser). An RS-232 Windows GUI interface is provided for
matrix routing control (Windows only).
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the following items are contained in the shipping
carton:
• Main switch console unit
• RS-232 V2.0 Protocol Instructions
• Ethernet V2.0 Protocol Instructions
• Master wireless IR Remote Control (SW-HD44)
• 19 inch Ear mount bracket (Part # 1U-440L)
• IR RX-100 IR Receiver Extender distance ~ 984ft (300M)
Receiver set
• CD Contents : Windows GUI, ISP V1.0 Windows driver
• RS-232 Cable 6 ft (2M)
• ISO Screws
• Operating Instructions
• Worldwide Universal Power Supply: DC12V, 5A, (Worldwide
Universal 100~240 VAC, AC 50/60Hz.)
TABLE OF CONTENTS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
• To prevent fi re or shock hazard, do not expose the unit to rain,
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
• Do not allow anything to rest on the power cabling or allow any
• To protect the unit from overheating, do not block any vents or
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise - without express written permission and consent
© Copyright 2013. All Rights Reserved.
Version 1.0 AUG 2014
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
1
SAFETY PRECAUTIONS
electrical shock and injury to persons.
moisture or install this product near water.
openings or empty slots in the unit, as you may damage parts
inside the unit.
PSU if it is damaged.
weight to be placed upon it or any person walk on it.
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
COPYRIGHT NOTICE
TRADEMARK ACKNOWLEDGMENTS