AEG ARCTIS G 9 88 50-4i Çalıştırma ve Kurulum Talimatı - Sayfa 13

Dondurucu AEG ARCTIS G 9 88 50-4i için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatı indirin. AEG ARCTIS G 9 88 50-4i 20 sayfaları. Integrated freezer
Ayrıca AEG ARCTIS G 9 88 50-4i için: Çalıştırma ve Kurulum Talimatları (21 sayfalar)

AEG ARCTIS G 9 88 50-4i Çalıştırma ve Kurulum Talimatı
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
• Many proprietary kitchen surface cleaners contain chemicals that can
attack/damage the plastics used in this appliance. For this reason it is
recommended that the outer casing of this appliance is only cleaned with
warm water with a little washing-up liqiud added.
1.
Remove frozen food and the food from the refrigerator. Wrap frozen
food in several layers of newspaper. Store it in a cool place, well covered.
2.
Switch the appliance off and remove the plug from the mains, or discon-
nect from the electricity supply.
3.
Clean the appliance and the interior accessories with lukewarm water
and with a little bicarbonate of soda added (5ml to 0,5 litre of water).
4.
Dry the appliance thoroughly.
5.
When everything is dry turn the appliance back on.

Energy Saving Tips

• Do not install the appliance near radiators or other sources of continuous
warmth. High ambient temperatures cause longer, more frequent opera-
tion of the compressor.
• Ensure sufficient air circulation at the appliance base and at the back wall
of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to cool
first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food will
then be used to cool the fridge.

Something Not Working

If the appliance is not functioning correctly, please carry out the following
checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers. Repairs
carried out by inexperienced persons may cause injury or serious malfunc-
tioning.
13