A-Neuvideo ANI-QUAD Kullanım Kılavuzu - Sayfa 5

Matris Anahtarlayıcı A-Neuvideo ANI-QUAD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo ANI-QUAD 19 sayfaları. 4x4 hdmi video wall processer & matrix switch

Sayfayı Yazdır

FRONT PANEL



IR Window:

IR receiver for signal from the device's remote control or external IR controller



Power

• ON/OFF: Press this button to power On the device or set it to standby mode.

• Factory reset to default: Press and hold Power button then connect power to reset the system to Factory default settings.



MENU:

• Press this button to bring up the OSD (On Screen Display) menu on screen.

• Press "MENU" with "-"button to switch output timing to 720p@60Hz instantly.

• Press "MENU" with "+" button to switch output timing to XGA (1024x768@60Hz) instantly.



-/+ Buttons:

Press these buttons to scroll down/up on the OSD selections then press "MENU" button to conﬁ rm.



CHANNEL INPUT 1~4 and CHANNEL OUTPUT A~D:

• Matrix mode:

• Press "Matrix/Dual/Wall" button repeatedly until the LED illuminates steady. You are now in Matrix mode.

• Press an output from A~D and then press corresponding input from 1~4. For example: press output A then press input 2, Will

result in Output A will display input 2's image. Each output setting must be made individually.

• Dual mode: To combine 2 sources to be presented on each HDMI output ports (Dual A and Dual B).

• Press "Matrix/Dual/Wall" button repeatedly until the LED extinguishes. You are now in Dual mode.

• Press output A/B and then press corresponding input 1/2. For example: press output A then press input 1, output A will display

input 1's image on the left side, then press output B and then press input 2, output A will display input 2's image on the right

side. Both output A and B will have identical images.

• Dual A group are outputs A and B, Dual B group are outputs C and D. Each group will output the same image simultaneously.

• Press button A or B for 3 seconds, to switch Dual A channel's audio between output A or B.

• Press button C or D for 3 seconds, to switch Dual B channel's audio between output C or D.

• Video Wall mode:

• Press "Matrix/Dual/Wall" button repeatedly until the LED blinks constantly. You are now in Video Wall mode

• Press input 1~4 to select a source to 4 displays (2 x 2 Video wall). The audio will be on output A only.



MATRIX/DUAL/WALL:

mode you are in. Matrix mode: LED illuminate constantly.

• Dual mode: LED will extinguish.

• Video Wall mode: LED will blink constantly.



LOCK:

Press once to lock the keypad and remote control, press and hold for 3 seconds to release the lock function.



SAVE:

To save an Input and Output conﬁ guration to recall later:

• Press "Matrix/Dual/Wall" button to select mode status.

• Press each output channel A~D and the corresponding input channel 1~4.

• Press "SAVE", the input 1~4 LEDs will all illuminate at the same time. Press input 1,2,3 or 4 to save to the system memory location.

• For example: Select Matrix mode, press output A then press input 4, then press "SAVE". This will save the corresponding setup

for later recall using the front panel or the remote control FAV.1 thru FAV.4 buttons.



RECALL:

Press "RECALL" and the input channel 1~4 LED will illuminate at the same time. Select input channel 1,2,3 or 4 to recall

the customized screen setting. Or using the remote control FAV.1~FAV.4 buttons.

PANEL DESCRIPTIONS

Press to switch between Matrix mode, Dual mode and Video Wall mode. The button LED will indicate which