AEG SANTO 75428 DT Kullanıcı Kılavuzu - Sayfa 10

Dondurucu AEG SANTO 75428 DT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG SANTO 75428 DT 46 sayfaları.

Pay attention that the border of

the doors are parallel to the top

border.

Reposition, level the appliance

and connect it to the mains

socket.

Unscrew the top handle bracket

from the handle rod (1). Unscrew

the bottom handle bracket from

the door (2).

Unscrew the top handle bracket

from the door (3) and screw onto

the bottom right-hand side of

the door (4).

Turn the handle bracket with the

handle rod 180° and screw them

to the door (5) and the fitted

handle bracket (6).

Move the small plug from right

to left.

In any case you do not want to

carry out the above mentioned

operations, contact the nearest

After Sales Service Force. The

After Sales Service specialist

will carry out the reversibility

of the doors at your cost.

Attention:

After

having

reversed

the

opening direction of the doors

check that all the screws are

properly tightened and that the

magnetic seal adheres to the

cabinet.

the

ambient

temperature is cold (i.e. in

Winter), the gasket may not fit

perfectly to the cabinet. in that

case, wait for the natural fitting

of the gasket or accelerate this

process by heating up the part

involved with a normal hairdrier.