AEG CHDF 6260 Kullanım ve Kurulum Kılavuzu - Sayfa 18

Havalandırma Davlumbazı AEG CHDF 6260 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. AEG CHDF 6260 22 sayfaları. Electrolux cooktop user manual
Ayrıca AEG CHDF 6260 için: Çalıştırma ve Kurulum Talimatları (21 sayfalar), Çalıştırma ve Kurulum Talimatları (21 sayfalar), Kullanım ve Kurulum Kılavuzu (21 sayfalar), Çalıştırma ve Kurulum Talimatları (23 sayfalar), Çalıştırma ve Kurulum Talimatları (22 sayfalar)

Installing the fume extractor hood in the wall unit - extractor

version (Filter version with charcoal filter)

• Apply the drilling template to the inside wall of the wall unit on the

right and left sides, and mark out and predrill Ø 2 mm mounting

holes as well as 2 x Ø 6 mm - 5 mm depth holes for the mounting

claws (installation aids).

• Unscrew the ventilation grill mounted on the appliance (1 screw),

apply the exhaust air union prepared to the required exhaust air

diameter, and twist it to the right to its fullest extent (so that it is

retained).

• Fully withdraw the vapour catcher of the hood.

• Important: Detach and insert the grease filters only when the

vapour catcher is fully withdrawn.

Remove the grease filters. First remove the rear and then the front

grease filter.

• For 19 mm side walls, the spacer discs clipped in on the appliance

body must be taken out. Mount the hood with 4 or 6 x Ø 4 mm

screws. Fig. 7.

Fig. 7

• Insert the hood in the furniture housing and engage both mounting

claws (installation aids) on the right and left sides in the side wall

of the wall unit and firmly hold the hood for further mounting.

Then fix the hood with the 4 or 6 x Ø 4 mm screws supplied.

• Refit the grease filters. Push-in the vapour catcher.