Kohler 20341T-PNE-CP Kurulum Talimatları Kılavuzu - Sayfa 9

Sıhhi Tesisat Ürünleri Kohler 20341T-PNE-CP için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Kohler 20341T-PNE-CP 10 sayfaları. Pneumatic in-wall tank with frame short height

Sayfayı Yazdır

9. To remove the flush valve Security tab at the

rear of the cistern, pull forward on the tab and lift out.

11. Remove discharge valve for cleaning or adjusting.

Cleaning the mesh filter

●To clean the mesh filter, release by rotating counter clockwise then pull free.

Rinse clean and fit before replacing the flush vavle.

Tighten

Open

Adjusting Inlet Valve

Raise or lower the water level in the tank by adjusting the float

●

level with the adjusting screw. Turn clockwise to increase the

water level and counter clockwise to reduce. The water level

must align with the water line mark in the tank.

Adjusting Outlet Valve

● If the flush volume is incorrect, the flush volume and overflow

level of the tank can be altered by adjusting the valve:

For full flush, adjust the bottom slide adjustment switch. Adjust

up to increase volume.

For reduced flush adjustment, adjust the float level. Adjust up

to increase volume. The reduced flush water lower level will

be at the bottom of the float.

1310920-A02-A

Security tab

Open

Corner

Mesh filter

10.With the flush valve fastener removed, the flush valve can

be lifted out.

Outlet valve

Tighten

Spacer

Adjustment switch

-9 -

Outlet valve

Inlet valve

Adjusting screw

Control pole

Floating box

Drainage valve

Floating box