AEG DBR9980HB Kullanıcı Kılavuzu - Sayfa 3

Havalandırma Davlumbazı AEG DBR9980HB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG DBR9980HB 12 sayfaları.

1. SAFETY INFORMATION

For your safety and correct operation of the appliance,

read this manual carefully before installation and use.

Always keep these instructions with the appliance even

if you move or sell it. Users must fully know the operation

and safety features of the appliance.

The wire connection has to be done by specialized

technician.

The motor earth connection shall be performed before

the connections of the neutral and phase conductors.

In case of replacement, the neutral and phase connec-

tions shall be disconnected before the earth connection.

The installation of the hood and the remote motor must

be carried out by specialized personnel.

• The manufacturer will not be held liable for any damages

resulting from incorrect or improper installation.

• The minimum safety distance between the cooker top

and the extractor hood is 650 mm (some models can be

installed at a lower height, please refer to the paragraphs

on working dimensions and installation).

• If the instructions for installation for the gas hob specify a

greater distance, this must be respected.

• Check that the mains voltage corresponds to that indicated

on the rating plate fixed to the inside of the hood.

• Means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

• For Class I appliances, check that the domestic power

supply guarantees adequate earthing.

• Connect the extractor to the exhaust flue through a pipe

of minimum diameter 150 mm. The route of the flue must

be as short as possible.

• Regulations concerning the discharge of air have to be

fulfilled.

• Do not connect the extractor hood to exhaust ducts car-

rying combustion fumes (boilers, fireplaces, etc.).

• If the extractor is used in conjunction with non-electrical

ENGLISH