A-Neuvideo HD-22 Kullanım Kılavuzu - Sayfa 6

Matris Anahtarlayıcı A-Neuvideo HD-22 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo HD-22 12 sayfaları. 2x2 hdmi matrix switcher

Sayfayı Yazdır

REAR PANEL

1
DC POWER INLET
The Switcher is fi tted with a DC power plug input connector.
Ensure that the used is of an approved type and is of suffi cient
current carrying connector capacity with the correct voltage and
connector polarity. 12Volt DC power supply 2A Max (Center pin
positive).
2
IR EXTENDER CONTROL
Support one of IR Extender
Extend distance maximum ~1000 ft/300 M
3
RS-232 CONNECTION
RS-232 control port to allow for interfacing to a PC Such as
a computer or touch panel control, to the switcher via this
DB-9pin Female connector for serial RS-232 control.
4
INPUTS- 1 & 2 HDMI
Connect a signal link of HDMI direct digital video/audio to
this Female HDMI connector. This connector supports HDMI
digital video/audio and DVI digital video sources.
Input 1 - HDMI Digital Video/Audio, Connector with fi x screw
Input 2 - HDMI Digital Video/Audio, Connector with fi x screw
5
OUTPUTS- 1 & 2 HDMI
Connect a signal link of HDMI direct digital video/audio to
this Female HDMI connector. This connector supports HDMI
digital video/audio and DVI digital video sources.
Output 1 - HDMI Digital Video/Audio, Connector with fi x screw
Output 2 - HDMI Digital Video/Audio, Connector with fi x screw
REAR PANEL
4
Power Jack:
DC Jack - Inner OD ᴓ 2.1mm (+ )
Outside OD ᴓ 5.5mm (GND)
Power input - 12VDC, 2A
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
Remote port :
DB-9pin Female connector
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the switcher
can be used with DVI digital video signals
HDCP compliant. DVI does not support audio.
HDMI digital video/audio connector:
HDMI Female connector.
Note: With the proper adapters, the switcher
can be used with DVI digital video signals
HDCP compliant.