AEG Perfekt Glide-36 Kullanım Kılavuzu - Sayfa 14

Havalandırma Davlumbazı AEG Perfekt Glide-36 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AEG Perfekt Glide-36 17 sayfaları. Built-in range hood
Ayrıca AEG Perfekt Glide-36 için: Kullanım Kılavuzu (18 sayfalar), Kullanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Trouble Shooting

If any problem occurs, please detach the plug from the socket

and contact Euro-Parts or a similarly qualified person in order

to avoid a hazard.

Fan does not turn on (but light turns on).

This is probably due to either a defective fan switch or a

burned out fan motor. Both can be replaced without

removing the range hood from the wall or cabinet. Use an

ohm meter to determine which component is not working. If

the ohm meter reads that the fan switch has 0 ohms of

resistance, then it is the motor that needs to be replaced. If it

reads anything other than zero, then the switch must be

replaced.

Fan only runs at once speed.

Please see above instructions.

Fan circulates air, but does not vent outside.

If air is blowing through the front vent openings, then your

range has been installed for ductless operation. In order to

convert the system to vent outside, a technician must install

ductwork from the range hood through either an outside wall

or the roof.

If air is not blowing from the front vent openings, check inside

the cabinet about the range hood. If you see a duct leading

away from the vent hood, then you have a system that vents

to the outdoors. If you do not see a duct, your unit may be

venting through the back wall.

P a g e