Kohler 1.1785.005 Kurulum Kılavuzu - Sayfa 15
Banyo Armatürleri Kohler 1.1785.005 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler 1.1785.005 41 sayfaları. Thermostatic electric shower
Sayfayı Yazdır
Installation
Warning, isolate
the electrical and
water supplies
before installing
the shower!
Decide on a suitable position for the shower unit and fittings leaving adequate
space for maintenance. A suitable position for the shower will have a minimum clear
distance of 100 mm around the shower unit to allow for cover removal and refitting.
See "Installation - Plumbing" for further details.
Note! If installation includes an Instantmatch by Whale® drain pump, see "Bluetooth"
section for information on position of wireless devices.
Optional
Top Fixing
Optional
Hole
Hole
Hole
Electrical
Connections
Inlet
Connector
Bottom
Fixing Hole
Optional
Hole
Fixing Hole
Optional
1327483-W7-A
Outlet
Hole
Connector
Use the installation template provided to mark and drill the required fixing holes. Do
not drill through the shower unit into the wall. Plaster and brick dust will damage
the internal components of the product. DO NOT drill into buried cables or pipes.
Note! Make sure that you mark a minimum of two fixing holes, one at the top and
one at the bottom.
Place Spirit Level on This Line
to Level Product Before Drilling
Installation Template
This Installation Template is compatible with
the following Mira Advance Electric Showers:
Standard 8.7 and 9.8 kW
Flex 8.7 and 8.9 kW
Flex Extra 8.7 kW
Mira Advance
THERMOSTATIC
ELECTRIC SHOWER
Bottom
8.7 and 9.8 kW
Kohler Mira Limited, July 2017
15
1306246-W2-D