A-Neuvideo ANI-2PIP-LOGO Kullanım Kılavuzu - Sayfa 7
Monitör A-Neuvideo ANI-2PIP-LOGO için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. A-Neuvideo ANI-2PIP-LOGO 15 sayfaları. 2x1 hdmi multiviewer
Ayrıca A-Neuvideo ANI-2PIP-LOGO için: Kullanım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
? 8
Show the full command list.
HELP 8
Show the full command list.
GET FW VER 8
Show the unit's current firmware version.
SET FACTORY DEFAULT 8
Reset all configurations to the factory defaults.
SAVE PRESET N1 8
Save the current configuration as preset N1.
N1 = 1 ~ 4
RECALL PRESET N1 8
Recall the saved configuration from preset N1.
N1 = 1 ~ 4
Switch to full screen routing mode and show input N1.
SET OUT A ROUTE N1 8
N1 = 1 ~ 2
GET OUT A ROUTE 8
Show the currently set full screen routing source.
SET WINDOW LAYOUT
Set the windowing mode to N1.
MODE N1 8
Available values for N1:
1
2
4
5
GET WINDOW LAYOUT
Show the currently selected windowing mode.
MODE 8
SET OUT A WINDOW
Select which input window will have top display priority in the
PRIORITY N1 8
dual-windowing modes.
N1 = 1 ~ 2
GET OUT A WINDOW
Show which input window currently has top display priority.
PRIORITY 8
SET WINDOW SWAP N1 8
Enable or disable the input window swap function.
Available values for N1:
0
1
GET WINDOW SWAP 8
Show the current state of the window swap function.
SET IN AUTO MODE N1 8
Enable or disable the auto input switching mode.
Available values for N1:
0
1
GET IN AUTO MODE 8
Show the current state of the auto input mode.
[Preset number]
[Preset number]
[Input port]
[PIP mode]
[SBS mode]
[POP mode]
[Full screen routing mode]
[Input port]
[Off]
[On]
[Off]
[On]
10
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
SET IN N1 EDID N2 8
Set the EDID to use with input N1.
N1 = 1 ~ 2
Available values for N2
1
2
GET IN N1 EDID 8
Show the EDID source currently used by input N1.
N1 = 1 ~ 2
SET OUT A TIMING N1 8
Set the scaled output resolution.
Available values for N1:
0
4
6
10
11
12
16
17
19
GET OUT A TIMING 8
Show the currently selected output resolution.
GET OUT A TIMING STRING
Show the currently selected output resolution's timing
description.
8
SET OUT A AUDIO SOURCE
Select the HDMI audio source to send to the output.
N 8
N1 = 1 ~ 2
GET OUT A AUDIO SOURCE 8
Show the currently selected HDMI audio source.
SET OUT A MUTE N1 8
Enable or disable the audio/video output mute function.
Available values for N1:
0
1
GET OUT A MUTE 8
Show the current state of the audio/video output mute
function.
GET OUT A SYNC STATUS 8
Show the current sync state of the HDMI output.
Set the contrast value for input N1.
SET IN N1 CONTRAST N2 8
N1 = 1 ~ 2
N2 = 0 ~ 100
[Input port]
[Internal EDID 1]
[Internal EDID 2]
[Input port]
[Native]
416
[1024x768]
[480P60]
417
[1280x800]
[720P60]
419
[1280x1024]
[1080P60]
420
[1366x768]
[576P50]
423
[1440x900]
[720P50]
424
[1600x900RB]
[1080P24]
425
[1600x1200]
[1080P25]
426
[1680x1050]
[1080P30]
430
[1920x1200RB]
[Input port]
[Off]
[On]
[Input port]
[Contrast level]
11