Kohler C3-050 Ev Sahibi El Kitabı - Sayfa 7

Banyo Armatürleri Kohler C3-050 için çevrimiçi göz atın veya pdf Ev Sahibi El Kitabı indirin. Kohler C3-050 35 sayfaları. Elongated bidet toilet seat
Ayrıca Kohler C3-050 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kurulum Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (2 sayfalar)

When WASH function is ON, press button to terminate WASH

function.

Press female wash when user seat on, activate female wash

(female only) and display current wash strength.

Continue press female wash to exchange spray strength when

female wash function is ON. The strength shall circulate per "min

dial, mid dial, max dial, mid dial" sequence.

Auto stop after continuous washing for 5min.

Press rear wash when user seat on. Activate rear wash and

display current wash strength.

Continue press rear wash to exchange spray strength when rear

wash function is ON. The strength shall circulate per "min dial,

mid dial, max dial, mid dial" sequence.

Default rear wash is oscillate mode, if you need to deactivate

oscillate or reactivate again, press and hold rear wash and

STOP button about 2s.

Auto stop after continuous washing for 5min.

The Bidet is equipped with wide oscillate function. If you want to

use wide oscillate function, please hold REAR + STOP button

both for 2s after REAR wash is activated.

Press WATER TEMP button to set spray water temperature per

OFF, low, mid, high, mid circulation when press button each time.

Set water temp and switch water temp parameter indicator ON. If it

is under OFF status, LED indicator is OFF.

Standby mode:

1. After deactivate water temp (water temp LED OFF), enter standby

mode. Meanwhile, minimize the product energy consumption.

2. After activate water temp (water temp LED ON), exit standby

mode, water temp heating function recovered.

Kohler Co.

1305685-MY01-C