Kohler C3-125 Ev Sahibi El Kitabı - Sayfa 7

Banyo Armatürleri Kohler C3-125 için çevrimiçi göz atın veya pdf Ev Sahibi El Kitabı indirin. Kohler C3-125 21 sayfaları. Toilet seat whith bidet functionality

Sayfayı Yazdır

ELECTRICAL CONNECTIONS

WARNING: Risk of electric shock, fire, or personal injury.

ded and connected only to a dedicated, nominal 220/240 VAC, 50/60 Hz circuit protected

by a 16 A thermal circuit breaker completed by a 30 mA Ground-Fault Circuit breaker.

If the product is not grounded and protected by a ground fault circuit interrupter or a higher

voltage circuit is used, electric shock, fire, or personal injury may occur.

NOTICE: This product is factory equipped with a specific electrical cord and plug to permit

connection to a proper electric circuit. Make sure that the product is connected to an outlet

having the same configuration as the plug. Do not use an adapter with this product. Do not

modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qua-

lified electrician. If the product must be reconnected for use on a different type of electric cir-

cuit, the reconnection should be made by qualified service personnel only.

NOTICE: Do not use an extension cord with this product.

NOTICE: Consult your local electrical codes before determining the connection type and

the electrical outlet location.

NOTICE: Do not plug in the seat until instructed to do so. This will avoid possible product

malfunction.

Preferred Connection

This electrical outlet must be a dedicated, nominal 220/240VAC, 50/60 Hz circuit protected

by a 16 A thermal circuit breaker completed by a 30 mA Ground-Fault Circuit breaker.

Do not insert the plug into the electrical outlet at this time.

This product must be groun-

Determine the electrical outlet location.

The electrical outlet should be located

within around 30 cm of the toilet to

accommodate the length of the power

cord.

An extension cord cannot be connected

to the seat's power cord.

Route the electrical wires, then install

and ground the electrical outlet.