Kohler C3-500/K-31331T-HC-0 Kurulum Kılavuzu - Sayfa 4

Banyo Armatürleri Kohler C3-500/K-31331T-HC-0 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler C3-500/K-31331T-HC-0 15 sayfaları. Smart seat

1. Toilet roughing-in requirements and installation tips
2
3
5
1. Distance between installation holes: about 140mm.
2. Distance between installation holes and tank front rim:>20mm.
3. Distance between installation holes and bowl inner rim: <70mm.
4. Distance between installation holes and tank top rim: 460 - 490mm.
5. Bowl inner diameter: 370 - 390mm.
6. The distance between the seat and the plug should be maximum 1 meter.
2. Install an Electrical Outlet
WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded. Connect only to a dedicated
220V~, 50 Hz, 10A circuit protected by Ground-Fault Circuit-
Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
It is recommended to use water-resistant socket. Do not use an extension cord
with the product.
NOTE: Follow local codes when determining the electrical outlet location.
Route the electrical and install to a 220V~, 50 Hz, 10A GFCI- or ELCB-
protected receptacle.
3. Preparation
Turn off the water supply to the toilet.
Flush the toilet to relieve any pressure from the water supply hoses.
Place a container under the inlet valve to catch any residual water.
Disconnect the water supply hose from the inlet valve.
Remove the existing toilet seat.
1361650-T01-B
1
4
4
Kohler Co.