Kohler ENGLEFIELD MILANO Kurulum Talimatları Kılavuzu - Sayfa 9

Banyo Armatürleri Kohler ENGLEFIELD MILANO için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Kohler ENGLEFIELD MILANO 17 sayfaları.

Sayfayı Yazdır
MILANO Round

2.4 Frame Installation

(a) Carefully lift the entire frame and move
into position onto tray or tile floor.
CAUTION: This is a 2 person lift.
Slide return extrusions into wall
retainers. For tray installations ensure
distance from edge of tray to frame
extrusions is equal.
=
IMPORTANT: Make sure top rail is level and
is still flush with return glass.
(b) Drill 4 x 3mm holes from inside of
shower enclosure in return extrusion
through pre-drilled holes in wall retainer.
(c) Fix extrusion to wall retainer with
countersunk screws
1213953-A02-C 04/10/2013
=
=
x4
3 mm
.
(supplied)
x4
CSK ST 10mm
Page 9
INSTALLATION INSTRUCTIONS
(d) Repeat steps (c) to (d) for other
wall retainer and return extrusion.
2.5 Lower Door Bumpers
(a) Insert pan screws into bumpers and
screw into bottom rail.
PAN ST
12mm
View from inside of shower

2.6 Door Installation

(a) Hang both doors on top rail from
unsprung rollers on inside. Press down
button on bottom rollers to allow bottom
rollers to clamp onto bottom rail.
View from inside of shower
x2
www.englefield.co.nz