AEG 916099616 Kullanıcı Kılavuzu - Sayfa 21

Kurutucu AEG 916099616 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 916099616 32 sayfaları.

10.3 Cleaning the condenser

condensador flashes on

If the symbol

the display, inspect the condenser and

its compartment. If it is dirty, clean it. Do

the check not less than once a 6 months.

WARNING!

Do not touch the metal

surface with bare hands.

Risk of injury. Wear

protective gloves. Clean

carefully to avoid damaging

the metal surface.

To inspect:

1. Open the door. Pull the filter up.

2. Open the condenser cover.

3. Turn the lever to unlock the

condenser lid.

4. Lower the condenser lid.

5. If necessary, remove the fluff from

the condenser and its compartment.

You can use a vacuum cleaner with

the brush attachment.

6. Close the condenser lid.

7. Turn the lever until it clicks into

position.

8. Put the filter back.

10.4 Cleaning the humidity

sensor

CAUTION!

Risk of humidity sensor

damage. Do not use

abrasive materials or steel

wool to clean the sensor.

To assure best drying results the

appliance is equipped with metal

humidity sensor. It is placed on the inner

side of the door area.

Over usage time the surface of the

sensor may get dirty which deteriorates

the drying performance.

We recommend to clean the sensor at

least 3 or 4 times or if you observe the

drop of drying performance.

ENGLISH