Kohler K-13672 Kurulum Kılavuzu - Sayfa 7

Banyo Armatürleri Kohler K-13672 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-13672 33 sayfaları.

Battery Lead

Connection

Faucet Lead

Connection

Circuit

Board

5. Control Unit Connections

Install the straight connector onto the control unit.

Determine the length of the electrical tubing required to run

between the faucet and the straight connector on the control unit.

Cut the electrical tubing to length (as needed).

Push the faucet lead wire through the electrical tubing.

Push the electrical tubing end into the straight connector on the

control unit and tighten the straight connector.

Connect the faucet lead wire to the circuit board. The electrical

tubing may be tied to the faucet supply hose with the cable ties

provided.

Install the 4 D-Cell alkaline batteries (provided) as shown. Note

the polarity shown on the battery holder and make sure that the

battery lead is connected securely to the circuit board.

Kohler Co.

Straight Connector

Electrical

Tubing

1031173-2-B