AEG LAVATHERM 56800 Kullanıcı Bilgileri - Sayfa 18

Kurutucu AEG LAVATHERM 56800 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG LAVATHERM 56800 36 sayfaları. Electrolux user information condenser dryer 56800

Sayfayı Yazdır

Cleaning heat exchanger

If the HEAT EXCHANGER display is illuminated, the heat exchanger

needs to be cleaned.

Caution! Operating when the heat exchanger is clogged with lint can

damage the dryer. This also increases energy consumption.

1. Open loading door

2. Open base door. To do this, press

the release button located beneath

the loading aperture and open the

base door to the left.

3. Remove lint from the inside of the

door and the heat exchange cham-

ber. Wipe the door seal with a

damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat ex-

changer out of the base and carry

it horizontally to prevent any re-

maining water from spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects

to clean the heat exchanger. You

could damage it an cause leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse thoroughly with a shower head.

8. Replace heat exchanger and lock into place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the HEAT EXCHANGER indicator is still lit.

Caution! Never operate the dryer without the heat exchanger.