AEG LAVATHERM T57819 Kullanıcı Bilgileri - Sayfa 20

Kurutucu AEG LAVATHERM T57819 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG LAVATHERM T57819 33 sayfaları. Condensation dryer

Cleaning heat exchanger

If the HEAT EXCHANGER display is illuminated, the heat exchanger needs to

be cleaned.

Caution! Operating when the heat exchanger is clogged with lint can dama-

ge the dryer. This also increases energy consumption.

1. Open loading door

2. Open base door. To do this, press the

release button on the bottom of the

loading opening and open the door to

the left.

3. Remove lint from the inside of the door

and the heat exchange chamber. Wipe

the door seal with a damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat exchan-

ger out of the base and carry it horizon-

tally to prevent any remaining water from

spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects to

clean. The heat exchanger could

develop leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse

thoroughly with a shower head.

8. Replace heat exchanger and lock into

place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the HEAT EXCHANGER indicator is still lit.

Caution! Never operate the dryer without the heat exchanger.