Kohler Devonshire K-1357-GLA-47 Kurulum Kılavuzu - Sayfa 5
Küvetler Kohler Devonshire K-1357-GLA-47 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler Devonshire K-1357-GLA-47 48 sayfaları. Bath with airjets
Ayrıca Kohler Devonshire K-1357-GLA-47 için: Ev Sahibi El Kitabı (29 sayfalar)
Sayfayı Yazdır
1. Prepare the Site
NOTICE: Do not support the bath by the rim.
NOTICE: Refer to the Roughing-in Guide packed with this product for proper minimum lbs/square foot
(kg/square meter) floor support loading.
NOTICE: Provide adequate ventilation and a minimum of 15 cubic feet (.4 cubic meters) in the installed
location for cooling the motor and to supply sufficient air for the blower. Do not install the blower motor
closer than 1" (2.5 cm) from the wall or other objects.
Make sure the floor offers adequate support for your bath, and verify that the subfloor is flat and
level.
Construct 2x4 or 2x6 stud framing designed for your particular installation.
Install an access panel to allow the blower motor to be serviced.
Position the plumbing according to the roughing-in information packed. Cap the supplies, and
check for leaks.
Kohler Co.
Showerhead
Blocking
Supply
Valves
Spout
Header
Over
Opening
Remove
bottom plate.
5
1040292-2-E