Kohler K-1112 Manuel - Sayfa 2

Küvetler Kohler K-1112 için çevrimiçi göz atın veya pdf Manuel indirin. Kohler K-1112 4 sayfaları. Bath with airjets
Ayrıca Kohler K-1112 için: Ev Sahibi El Kitabı (32 sayfalar), Ev Sahibi El Kitabı (29 sayfalar), Kurulum Kılavuzu (48 sayfalar), Ev Sahibi El Kitabı (36 sayfalar), Kurulum Kılavuzu (44 sayfalar), Kaba İnşaat Kılavuzu (4 sayfalar), Kurulum Kılavuzu (48 sayfalar), Kurulum Kılavuzu (44 sayfalar), Ev Sahibi El Kitabı (29 sayfalar)

Sayfayı Yazdır
Kohler K-1112 Manuel
21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
Product Information
Drop-in, 3-side integral
flange, left drain
Drop-in, 3-side integral
flange, right drain
Drop-in cut-out dimensions:
58-1/2" (148.6 cm) x 40-1/2" (102.9 cm)
Fixture*:
basin area
Bathing well
43" (109.2 cm) x
24-5/8" (62.5
cm)
water depth
To overflow
15" (38.1 cm)
* Approximate measurements for comparison only.
Pump:
Hp
1-speed
1.25
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1047167-1-B
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1112-L
shown
K-1112-R
not shown
top area
53-1/2" (135.9
cm) x 32-1/8"
(81.6 cm)
capacity
57 gal (215.9 L)
V
Hz
120
60
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control Access
1-1/4" (3.2 cm)
19-1/2"
(49.5 cm)
21" (53.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
weight
lbs./square foot (390 kg/square meter) loading.
110 lbs
(50 kg)
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
A
7.5
2
1-1/4"
1-1/2"
(3.2 cm)
(3.8 cm)
Tile Flange
Drop-In Rim
Detail
Detail
42" (106.7 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.