A-Plus Water DuraLine Manuel - Sayfa 5

Ölçüm Cihazları A-Plus Water DuraLine için çevrimiçi göz atın veya pdf Manuel indirin. A-Plus Water DuraLine 9 sayfaları. Electronic meter monitor

 Press and hold all 3 buttons on the display simultaneously for 3 seconds

 Total Flow button: Toggles the values up

 Peak Flow button: Toggles the values down

 Flow button: Press to advance to next screen

Screen One: CLR MEMORY YES / NO

 YES to clear memory of Total Flow and Peak Flow

 NO to continue with programming

For initial set up, select NO.

 Press the Flow button to advance to next screen

Screen Two: SET PULSES (factory set at 235 for Hall Effect meter)

 Set pulses per gallon (PPG) for Hall Effect meter

For initial set up, confirm pulse is set at 235

 Press the Flow button to advance to next screen

Screen Three: SET THRESHOLD TOTAL 2 YES/NO

 YES to use threshold function

 NO to turn off threshold function (this action skips screen four)

Select YES to use threshold function

 Press the Flow button to advance to next screen