Kohler K-1146 Kurulum Kılavuzu - Sayfa 6

Küvetler Kohler K-1146 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-1146 48 sayfaları. Bath whirlpool
Ayrıca Kohler K-1146 için: Ev Sahibi El Kitabı (32 sayfalar), Kurulum Kılavuzu (48 sayfalar), Kurulum Kılavuzu (44 sayfalar)

Sayfayı Yazdır

Clear space

for pump

3. Secure the Unit — Models With Support Blocks

CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the

piping or pump for structural support of the whirlpool.

CAUTION: Risk of product damage. Do not support the whirlpool by the rim.

Choose the installation option that best applies to your particular installation. Follow the appropriate

instructions.

If the subﬂoor is not level, shim the whirlpool support blocks as necessary.

Option Using a Cement or Mortar Bed

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

NOTE: The pump support bracket (when the pump banding straps are cut) and support blocks must

rest directly on the subﬂoor.

Spread a 2" (5cm) thick layer of cement or mortar on the subﬂoor where the whirlpool will be set. This

will help secure, level, and support the unit. Clear all the material away from the pump support bracket

and support block locations.

Position a piece of plastic drop cloth material on top of the cement or mortar bed. With help, carefully lift

the whirlpool into place, and make sure the pump support bracket and support blocks do not rest in the

bed material.

Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.

Remove the protective tape from the rim. Apply a continuous bead of high-quality silicone sealant around

the entire rim of the whirlpool.

Option Using Construction Adhesive

Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks. With

help, carefully lift the whirlpool into position.

Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support blocks.

Remove the protective tape from the rim. Apply a continuous bead of high-quality silicone sealant around

the entire rim of the whirlpool.

1010564-2-B

Spread a 2" (5cm)

layer of cement or

mortar bed material

Clear spaces

for support

blocks

Apply a bead of

silicone sealant

around the entire

rim

Apply construction

adhesive to the

support blocks

Kohler Co.