Kohler K-1184 Kurulum Kılavuzu - Sayfa 6

Küvetler Kohler K-1184 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-1184 21 sayfaları. Flanged acrylic bath with integral apron
Ayrıca Kohler K-1184 için: Kurulum ve Bakım Kılavuzu (29 sayfalar), Kurulum ve Bakım Kılavuzu (25 sayfalar), Kurulum Kılavuzu (17 sayfalar)

Sayfayı Yazdır

6. Complete the Installation

NOTE: Models with an integral apron are designed so the ﬁnished wall material [1-1/2" (3.8 cm)

maximum] will overlap the apron columns. The ﬁnished ﬂoor material [2" (5.1 cm) maximum] should butt

up against the apron.

Carefully remove the protective tape from the bath rim.

If necessary allow for deck mounted valves and spout.

Seal the joints between the bath rim edges and the water-resistant wall material with silicone

sealant. Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Install the faucet trim according to the faucet manufacturer's instructions.

Clean-Up Procedures

CAUTION: Risk of product damage. Do not allow cleaners containing petroleum distillates to remain

in contact with the surface for long periods of time.

CAUTION: Risk of product damage. Do not use abrasive cleaners, as they may scratch and dull the

bath surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Risk of product damage. Do not use metal scrapers, wire brushes, or other metal tools to

remove stains, paint, plaster, or tar. Use turpentine or paint thinner to remove stains, paint, or tar. Use

a powder-type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

Clean and rinse the bath completely with water immediately after applying cleaners. Rinse and dry

any overspray that lands on nearby surfaces.

1014139-2-D

Water-Resistant

Wall Material

Bath

Framing

Finished

Wall

Apply silicone

sealant to the

joint between the

bath and the

finished wall.

Kohler Co.