Kohler C3-400 Ev Sahibi El Kitabı - Sayfa 15
Tuvaletler Kohler C3-400 için çevrimiçi göz atın veya pdf Ev Sahibi El Kitabı indirin. Kohler C3-400 26 sayfaları. Smart seat
Ayrıca Kohler C3-400 için: Ev Sahibi El Kitabı (39 sayfalar)
Sayfayı Yazdır
PREPARATIONS BEFORE INITIAL OPERATIONS /
初次使用前准备
■ Ensure if water inlet valve is OPEN.
确认进水阀是否已打开。
■ Connect water inlet hose according to Installation Guide. Open water
stop valve, and plug power cord.
按安装说明书接上进水软管，打开止水阀，插上电源。
■ Plug power cord into socket. Bidet seat generates one short beep,
wand extends and retracts once, and the indicator on the side panel
blinks until initialization completes.
当电源线插上电源插座，便盖发出短蜂鸣 1 次，喷管伸缩 1 次，侧键盘
上指示灯闪烁，直至初始化结束。
■ During initialization, it is normal to hear motor rotating and water flow.
初始化过程中，可听到电机转动声和流水声，均属正常。
■ Test according to "USE GUIDE" section.
参照"使用指导"章节进行测试。
■ Factory settings for initial use .
初次使用时为出厂设置状态。
Front wash:
• Water flow: Mid
• Spray position: Mid
Rear wash:
• Water flow: Mid
• Spray position: Mid
女用：
• 水流强度：中档
• 冲洗位置：中档
臀洗：
• 水流强度：中档
• 冲洗位置：中档
The above settings are for the full-functional version. For differences in
the specifications of models, refer to their product configuration matrix.
以上设置为全功能版本，具体型号的规格差异见产品配置表。
Kohler Co.
Water temp: Mid
Seat temp: Mid
Lighting: ON
Energy save: OFF
水温：中档
圈温：中档
夜灯功能：开启
节能模式：关闭
15
1349982-T01-A