Kohler K-14231 Kurulum Kılavuzu - Sayfa 4

Tuvaletler Kohler K-14231 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-14231 21 sayfaları. Close-coupled toilets
Ayrıca Kohler K-14231 için: Kurulum Kılavuzu (20 sayfalar), Ev Sahibi El Kitabı (29 sayfalar)

Sayfayı Yazdır

Wax Seal

Bottom of Bowl

Closet Flange

2. Install the New Toilet

CAUTION: Risk of external leakage. Do not lift or rock the

bowl after placement. If you break the watertight seal, you must

install a new wax seal.

CAUTION: Risk of product damage. Overtightening may cause

breakage or chipping of vitreous china.

Install or relocate the supply and outlet as necessary to conform

to the roughing-in dimensions.

Install a supply shut-off valve.

Record the model number in the Homeowners Guide.

Lay the toilet down onto a padded surface.

From the bottom of the toilet, ﬁrmly press a new wax seal around

the toilet outlet.

Remove the temporary rag (if used) from the toilet ﬂange hole.

Align and lower the toilet over the ﬂange and T-bolts.

Apply your full body weight around the toilet to set the seal.

Place the plastic bolt cap bases over the T-bolts in the "up"

position as marked.

Place the metal washers and nuts on the plastic bolt cap bases

and T-bolts.

Carefully tighten the nuts.

1004604-2-F

Bolt Cap

Bolt Cap Base

T-Bolt

Nut

Washer

Kohler Co.