Kohler K-25042-SSL-0 Manuel - Sayfa 11

Tuvaletler Kohler K-25042-SSL-0 için çevrimiçi göz atın veya pdf Manuel indirin. Kohler K-25042-SSL-0 40 sayfaları.

Spacer

Wings

9. Install the Bowl

NOTE: The back of the bowl should touch the wings of the upper

plastic spacer and the plastic connector.

NOTE: If the baseboard molding is thicker than 1/8" (3 mm), it

may need to be cut to allow the bowl to engage the plastic spacer

wings.

Lubricate the top of the connector gasket with silicone plumber's

grease.

Position the toilet over the connector and guide it down onto the

gasket.

Verify that the back of the bowl is ﬂush with the wings of the

upper plastic spacer and the plastic connector.

NOTE: Use the longer screws for the wall, and shorter screws for

the ﬂoor.

Install the plastic washers, screws, and caps (provided).

Tighten the bolt cap screws and snap on the low-proﬁle caps.

Kohler Co.

1365609-2-B