Kohler COURAGE SV710-740 Kullanıcı El Kitabı - Sayfa 14
Motor Kohler COURAGE SV710-740 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Kohler COURAGE SV710-740 20 sayfaları. Vertical crankshaft
Ayrıca Kohler COURAGE SV710-740 için: Kullanıcı El Kitabı (21 sayfalar), Kullanıcı El Kitabı (21 sayfalar)
Sayfayı Yazdır
.
The fuel system must be completely
emptied,
or the gasoline must be treated
with a stabilizer
to prevent
deterioration.
If you choose to
use a stabilizer,
follow tile manufacturer's
recommendations,
and add tile correct amount
for
the capacity
of the fuel system. Fill the fuel tank
with clean, fresh gasoline.
Run the engine for 2-3
minutes
to get stabilized
fuel into the carburetor.
Close fuel shut off valve when unit is being stored
or transported.
To empty the system, run the engine until the tank
and system are empty.
.
Remove the spark plugs. Add one tablespoon
of
engine oil into each spark plug hole. Install plugs,
but do not connect tile plug leads. Crank the
engine two or three revolutions.
5. Store the engine in a clean, dry place.
Parts Ordering
Tile engine Specification,
Model, and Serial Numbers
are required
when ordering
replacement
parts from
your Kohter Engine Service Dealer. These numbers
are
found on the identification
plate which is affixed to the
engine shrouding.
Include letter suffixes if there are
any. See Engine Identification
Numbers
on page 5.
Always insist on genuine Kohler parts. All genuine Kohler
parts meet strict standards
for fit, reliability,
and
performance.
Major Repair
Major repair information
is available
in Kohler Engine
Service Manuals.
This type of repair generally
requires
the services of a trained
mechanic
and the use of
special tools and equipment.
Kohler Engine Service
Dealers have the facilities, training,
and genuine
Kohler
replacement
parts necessary
to perform
this service.
For the nearest
Sales & Service location:
* visit our website www.kohlerengines.com
* call 1-800-544-2444 (U.S. & Canada)
* look in the yellow pages under
Engines-Gasoline
Model
Designation
Model SV730 for example:
S designates
Courage
engine, V designates
vertical crankshaft,
and 730
indicates
the numerical
model designation.
A letter
suffix designates
a specific version as follows:
Suffix
Designates
S
Electric Start
Courage® SV710-740
Specifications
Model: ...................................................................................SV710.................................SV715...........................SV720
Bore: ................................................ mm (in.) ......................83 (3.27) .............................83 (3.27) .......................83 (3.27)
Stroke: ............................................. mm (in.) ......................67 (2.64) .............................67 (2.(4) .......................67 (2.64)
Displacement: .................................cm 3(in 3)......................725 (44.2)...........................725 (44.2).....................725 (44.2)
Power (¢_3600 RPM): ....................kW (HP) ......................14.9 (20*)...........................16.4 (22*).....................17.2 (23*)
Compression Ratio: .............................................................9:1.......................................9:1.................................9:1
Weight: ...............................................kg (lb.) ...................... 4 1.2 (91) .............................41.2 (91) .......................41.2 (91)
Oil Capacity (w/filter) - approximate,
determined by oil filter used:
1.6-1.8 L (1.7-1.9 U.S. qt.)
Lubrication:
Combination
Pressure/Splash
Lube
w/full
Flow Filter
Model: ...................................................................................
SV725/SV730 .................... SV735 ........................... SV740
Bore: ................................................
mm (in.) ...................... 83 (3.27) ............................. 83 (3.27) ....................... 83 (3.27)
Stroke: .............................................
mm (in.) ...................... 67 (2.64) ............................. 67 (2.(4) ....................... 67 (2.64)
Displacement:
.................................
cm 3(in 3)...................... 725 (44.2) ........................... 725 (44.2) ..................... 725 (44.2)
Power (¢_ 3600 RPM): .................... kW (HP) ...................... 17.9(24")/18.6 (25*) ........... 19.3 (26*) ..................... 20.1(27")
Compression
Ratio: .............................................................
9:1.......................................
9:1................................. 9:1
Weight: ...............................................
kg (lb.) ...................... 41.2 (91) ............................. 41.2 (91) ....................... 41.2 (91)
Oil Capacity
(w/filter) - approximate,
determined
by oil filter used:
1.6-1.8 L (1.7-1.9 U.S. qt.)
Lubrication:
Combination
Pressure/Splash
Lube w/full Flow Filter
Exhaust Emission
Control
System for models
SV710-SV740 is EM for U.S. EPA and Europe;
PAIR for California
Tier III.
*Horsepower
ratings exceed Society of Automotive
Engineers
Small Engine Test Code J1940. Actual engine
horsepower
is lower and affected by, but not limited to, accessories
(air cleaner, exhaust, charging,
cooling, fuel
pump, etc.), application,
engine speed and ambient
operating
conditions
(temperature,
humidity,
and altitude).
Kohler reserves
the right to change product
specifications,
design, and standard
equipment
without
notice and
without
incurring
obligation.
14