Kohler K241 Kullanıcı El Kitabı - Sayfa 5

Motor Kohler K241 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Kohler K241 17 sayfaları. 10/12/14/16hp
Ayrıca Kohler K241 için: Kullanıcı El Kitabı (14 sayfalar), Kullanıcı El Kitabı (17 sayfalar), Çok Dilli Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Fuel Recommendations

WARNING:

Explosive

Fuel!

Gasoline is extremely

flammable

and its vapors can

explode if ignited. Store gasoline only in approved

containers,

in well ventilated, unoccupied

buildings,

away from sparks or flames. Do not fill the fuel tank

while the engine is hot or running, since spilled fuel

could ignite if it comes in contact with hot parts or

sparks from ignition. Do not starl the engine near

spilled fuel. Never use gasoline as a cleaning agent.

General Recommendations

Purchase gasoline

in small quantities

and store in

clean, approved

containers.

A container with a capacity

of 2 gallons or less with a pouring spout is

recommended.

Such a container

is easier to handle

and helps eliminate

spillage during refueling.

Do not use gasoline left over from the previous

season, to minimize gum deposits in your fuel system

and to insure easy starting.

Do not

add oil to the gasoline.

Do not overfill the fuel tank. Leave room for the fuel to

expand.

Fuel Type

For best results use only clean, fresh, unleaded

gasoline with a pump sticker octane rating of 87 or

higher. In countries

using the Research method, it

should be 90 octane minimum.

Unleaded gasoline is recommended

as it leaves less

combustion

chamber deposits.

Leaded gasoline may

be used in areas where unleaded

is not available and

exhaust emissions

are not regulated.

Be aware

however, that the cylinder

head will require more

frequent service.

Gasoline/Alcohol

blends

Gasohol (up to 10% ethyl alcohol, 90% unleaded

gasoline by volume) is approved as a fuel for Kohler

engines. Other gasoline/alcohol

blends are not

approved.

Gasoline/Ether

blends

Methyl Tertiary Butyl Ether (MTBE) and unleaded

gasoline blends (up to a maximum

of 15% MTBE by

volume) are approved as a fuel for Kohler engines.

Other gasoline/ether

blends are not approved.

Engine Identification

Numbers

When ordering parts, or in any communication

involving

an engine, always give the Model,

Specification,

and Serial Numbers

of the engine.

The engine identification

numbers appear on decal (or

decals) affixed to the engine shrouding.

Include letter

suffixes, if there are any.

Record your engine identification

numbers on the

identification

label below (Figure 4) for future

reference.

MODEL NO.

SPEC. NO.

DISPL (CC)

SERIAL NO.

REFER TO OWNER'S MANUAL FOR

SAFETY, MAINTENANCE

SPECS

AND ADJUSTMENTS.

FOR SALES

AND SERVICE IN US/CANADA

CALL:

I-800-544-2444

KOHLER CO. KOHLER, WI USA

Figure 4. Engine Identification

Label.

Operating Instructions