acaia AC002 Kullanıcı Kılavuzu - Sayfa 5

Terazi acaia AC002 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. acaia AC002 15 sayfaları.
Ayrıca acaia AC002 için: Kullanıcı Kılavuzu (15 sayfalar)

Sayfayı Yazdır

Product Care Information

Battery Charge

• You can charge the battery by plugging the USB cable into

any of the power supplies listed below:

• A computer

• A USB wall-charger with an output of 5 volts and 1 amp

• A DC car-charger with an output of 5 volts and 1 amp

• It takes about 1-2 hours to fully charge the battery. Try not to

let the battery completely run out before charging. Charge

as needed.

• Remaining battery power percentage can be viewed via the

Acaia apps.

* Note: Using a non-certified charger could damage your Acaia scale's circuit board or battery.

Calibration

Turn on scale

Turn on the

Acaia Pyxis.

Care and Cleaning

• Use a soft cloth with warm water only to clean the product.

• Do not use detergent or other chemicals for cleaning and soaking as it can damage the

anodized coating on the product.

Tap T button

Make sure the scale

is in the weighing

mode and the unit

is set to 'gram', then

tap 'T' button rapidly.

Scale displays "CAL"

Keep tapping 'T'

button until 'CAL' is

shown on the

display.

Place a weight

Place a 100 g weight

on the scale and wait

until the display shows

'_End_'.

Calibration is now

complete.